7/8" Simpson MCR08712 Rebar Cutter Redirect Nails used for the joist

Nails used for the joist attachment must be driven at an angle so that they penetrate through the corner of the joist into the header

500 rpm and 6

secure connections in light to medium-gauge steel

this Simpson Strong-Tie F08T225WDC Self-Drilling Fiber Cement Screw delivers

reducing stress on connections

7/8" Simpson MCR08712 Rebar Cutter Redirect Nails used for the joistWhen hole placement conflicts with rebar or wire mesh, these bits allow the rebar to be removed so the hole can be drilled to the proper depth. Simpson rebar cutters are separate from shanks. A shank adaptor designed for the rotohammer in use is required (sold separately). Shanks work will all sizes of rebar cutters. The overall length of this rebar cutter is approximately 15".