Wintriss Strain Links Strain link type:Strain Link (no connector) with 30' cable force guided contacts (Type A

force guided contacts (Type A EN50205) Maximum Switching Voltage 250 VAC Minimum Load 10mA @ 5 VDC Maximum Contact Resistance 100 micro ohms / 1A @24 VDC

This diffuse reflective photosensor is compatible with the following connection hardware:

Up to 8 die-mounted sensors can be wired to the 12-pin terminal block on the back of the board

Spare key for the SmartPAC PRO enclosure

For SmartPAC 2 with a date code (serial number) 1237XXXX and lower

Wintriss Strain Links Strain link type:Strain Link (no connector) with 30' cable force guided contacts (Type AThe strain links are the press mounted force sensors used by Wintriss AutoSet 1500, 1500+, 1504+ tonnage monitors, and the AutoSetPAC and WaveFormPAC SmartPAC PRO tonnage modules. Strain Links are available in 3 different versions: With no connector wired with a 30' cable, with no connector wired with a 100' cable, or with an external Hirschmann connector (on the right in the photo). When ordering a strain link with a Hirschmann connector, you must