3 Link Hardware Assembly for 7/8 Inch and 1.25 inch Rod Ends Artec Industries Lighting - Exterior Lighting - Mounting Brackets(Lighting) choose Artec Industries

choose Artec Industries

Truss is low profile allowing link joints to be mounted with ideal geometry using the proper brackets - from 7 to 10 inches from the axle centerline

the laser cut vents keep your engine compartment cool and don't require you to bolt on an extra piece of mesh material

Welding should be done by a competent welder and Artec Industries is not liable For incorrect installation or improper welding

We offer ABS brackets and tone rings for 14 bolt and Sterling

3 Link Hardware Assembly for 7/8 Inch and 1.25 inch Rod Ends Artec Industries Lighting - Exterior Lighting - Mounting Brackets(Lighting) choose Artec Industries3 Link Hardware Assembly for 7 8 Inch and 1. 25 Inch Rod Ends. All the hardware you need to mount your 3 link kit with 7 8 Inch and 1. 25 Inch Rod Ends. Please refer to the table below to ensure you are getting the correct hardware to match your kit. Note: Our Easy 3 link kits include spacers for the 1. 25 Inch Rod Ends that have a 3 4 Inch hole but some of the brackets in the kits have a 9 16 Inch hole and will need to be drilled to 3 4 Inch to match